GaN Power Amplifier Boosts 225 To 1215 MHz

In an IMS exhibition floor noteworthy for its number of new GaN product announcements, RFMD showed its model RFHA1006 GaN power amplifier with high efficiency and flat gain across an instantaneous bandwidth of 225 to 1215 MHz. Suitable for continuous-wave (CW) and pulsed use, it is a good match for radar, wireless infrastructure, and two-way radios. The amplifier features an input-matched GaN transistor packaged in an air-cavity ceramic housing for excellent thermal stability and dissipation of heat. The amplifier requires external output impedance matching. It delivers 9 W (+39.5 dBm) output power from 225 to 1215 MHz with 16-dB gain. It is designed for use from a +28-VDC supply and achieves 60% power-added efficiency (PAE). For more on the model RFHA1006 GaN amplifier, visit RFMD at booth No. 1210.

Please or Register to post comments.

Newsletter Signup

Webcasts

GaN Roundtable: The State of GaN Reliability Today

Wednesday, April 3rd, 2013, 2:00 pm ET. Gallium nitride (GaN) has come a long way over the past few years in terms of affordability, industry acceptance and, in particular, reliability. In this webcast roundtable, a panel of expert speakers will assess the current state of GaN reliability, along with offering predictions for its future.

Click here to register!

Whitepapers

New App Note: Best Practices for Making the Most Accurate Radar Pulse Measurements
Sponsored by Agilent Technologies
Download this app note

Agilent Technologies Complex Modulation Generation with Low Cost Arbitrary Waveform Generators - Agilent's Trueform Architecture for Wireless Applications
Sponsored by Agilent Technologies
Download this white paper

Browse more white papers from Microwaves and RF

Connect With Us