Double-Balanced Wideband Mixers Cover 0.7 To 10 GHz

June 13, 2007
To satisfy GPS, telecommunication, radar, EW, and instrumentation applications, a family of wideband, double-balanced mixers has emerged. The monolithic-microwave integrated circuits (MMICs) cover the 0.7-to-10-GHz band. The CGY2180UH, CGY2181UH, and ...

To satisfy GPS, telecommunication, radar, EW, and instrumentation applications, a family of wideband, double-balanced mixers has emerged. The monolithic-microwave integrated circuits (MMICs) cover the 0.7-to-10-GHz band. The CGY2180UH, CGY2181UH, and CGY2182UH use on-chip baluns to provide rejection of the local oscillator (LO) to the RF and IF paths of greater than 40 dB. Thanks to the passive-mixer structure, the MMICs flaunt a high dynamic range with an input 1-dB compression point of more than +12 dBm. The CGY2180UH was designed to operate from 0.7 to 3.7 GHz. The CGY2181UH operates from 1 to 4.5 GHz while the CGY2182UH spans 3 to10 GHz. Samples and demonstration boards are available from stock.

OMMIC, 2, Chemin du Moulin B.P. 11, 94453 Limeil-Brevannes Cedex, France; ++33 (0)1 45 10 67 31, FAX: ++33 (0)1 45 10 69 53, Internet: www.ommic.com

See Associated Figure

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...