Daljeet Singh

Daljeet
Singh
Articles
Understand Requirements For WiMAX Testing
The test requirements of IEEE 802.16-2004 for WiMAX transmitters and receivers can be incorporated into the experimental tester for evaluating the performance of WiMAX devices.
Building A Receiver For WiMAX Testing
The baseband test receiver designed for WiMAX testing performs extensive packet detection, frequency offset measurements and correction, and a variety of symbol detection and processing.
Establish Test Procedures For WiMAX Transceivers
By understanding WiMAX signals and how they can be impaired by distortion and noise, it is possible to construct a baseband test receiver for evaluating performance per IEEE 802.16-2004.
Whitepapers

How to Do Fixture De-Embedding to Match Signal Integrity Simulations to Measurements​
Sponsored by Keysight Technologies
Download this white paper


Testing S-Parameters on Pulsed Radar Power Amplifier Modules​
Sponsored by Rohde & Schwarz
Download this white paper

 

 

 

Webcasts

Perform Power Supply Frequency Response Analysis using an Oscilloscope
May 19, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


PAM-4 Transmitter and Receiver Design Characterization Solutions
May 21, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


DisplayPort 1.3 – PHY Layer Test Requirements
May 27, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


Extraction, Verification, and Usage of a Short Haul Opto VCSEL Model
May 28, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×