Eamon Nash

Eamon
Nash
Articles
ICs Control Gain In Wireless Networks
These digitally controlled circuits provide precise control of amplitude levels over a 31.5-dB range through 1 GHz for applications in wireless infrastructure equipment.
RF Power Calibration Aids Wireless Transmitters
The use of precise RF power measurements and calibration techniques can save operating costs and improve the spectral performance of wireless communications transmitters.
High-Speed Logamps Precisely Detect Power
The logarithmic amplifier shouldnt be ignored when it comes time to develop power-measurement circuitry for commercial and military slow- and fast-response needs.
Single Chip Realizes Direct-Conversion Rx
Direct-conversion Rxs offer advantages in simplicity compared to conventional superheterodyne approaches, although attention must be paid to some of the trade-offs.
Assessing Multicarrier Direct-Conversion Transmitters
Careful component selection can make direct-conversion architectures practical for multicarrier WCDMA and CDMA2000 cellular base stations.
Whitepapers

IMD Measurements with IMDView: MS4640B Series Vector Network Analyzer
Sponsored by Anritsu
‚Äč
Download this white paper


How to Select an Analog Signal Generator
Sponsored by Rohde & Schwarz
Download this white paper

Webcasts

MIPI - Overcome Test Challenges to Ensure Interoperability for your PHY
June 23, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


Automating Semiconductor and Power Semiconductor Device Testing
June 24, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


Successfully Make Power and AC Line Disturbance Measurements
June 25, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!

 

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×