Huseyin Arslan

Huseyin
Arslan
Articles
Wireless Laboratory Aids Students And Research
Building a university test laboratory with instruments employing a software-defined-radio (SDR) architecture helps educate students and promotes research efforts.
Understand Requirements For WiMAX Testing
The test requirements of IEEE 802.16-2004 for WiMAX transmitters and receivers can be incorporated into the experimental tester for evaluating the performance of WiMAX devices.
Building A Receiver For WiMAX Testing
The baseband test receiver designed for WiMAX testing performs extensive packet detection, frequency offset measurements and correction, and a variety of symbol detection and processing.
Establish Test Procedures For WiMAX Transceivers
By understanding WiMAX signals and how they can be impaired by distortion and noise, it is possible to construct a baseband test receiver for evaluating performance per IEEE 802.16-2004.
Whitepapers

IMD Measurements with IMDView: MS4640B Series Vector Network Analyzer
Sponsored by Anritsu
‚Äč
Download this white paper


How to Select an Analog Signal Generator
Sponsored by Rohde & Schwarz
Download this white paper

Webcasts

MIPI - Overcome Test Challenges to Ensure Interoperability for your PHY
June 23, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


Automating Semiconductor and Power Semiconductor Device Testing
June 24, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


Successfully Make Power and AC Line Disturbance Measurements
June 25, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!

 

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×