Jie Jin

Jie
Jin
Articles
Arming Antennas With Dual Bandstops
Various methods can achieve an antenna with band-notched characteristics. With the present design, the authors inserted C-shaped slots in various antenna configurations to create a desired frequency stopband.
Tiny Antenna Arms UWB Applications
This quasi-self-complementary antenna employs a coplanar-wave-guide feed to achieve extremely wide bandwidth of 2.3 to 14.5 GHz in the tiny dimensions needed for portable wireless applications.
LNA Quiets 3.1 To 10.6 GHz
This broadband amplifier is designed to cover the UWB frequency range from 3.1 to 10.6 GHz with low noise figure while operating at a low supply voltage.
Low-Power TIA Tunes Gain At 2.4 GHz
This transimpedance amplifier employs a current-reuse stage and cascade differential stage to achieve a continuous gain tuning range of 15 dB and low noise figure of 1.061 dB at 2.4 GHz.
Whitepapers

Adding EMI Pre-compliance Testing to the Product Development Process is Cost-effective Insurance
Sponsored by Keysight Technologies
Download this white paper


New! Wi-Fi Standards Poster
Sponsored by Tektronix
Download this white paper


Reducing Life Cycle Costs with Reliable Airframe Microwave Assemblies
Sponsored by WL Gore
Download this white paper

Webcasts

Breakthrough Insight into DDR4/LPDDR4 Memory Greater Than 2400 Mb/s
January 13, 2015 @ 1:00pm EST
Sponsored by Keysight Technologies

Register Now!


Overcoming Test Challenges of 100Gb Ethernet and Beyond
January 15, 2015 @ 1:00pm EST
Sponsored by Keysight Technologies

Register Now!


RF Measurements You Didn't Know Your Oscilloscope Could Make
January 21, 2015 @ 1:00pm EST
Sponsored by Keysight Technologies

Register Now!

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×