6-dB Directional Coupler Spans 800 To 2500 MHz

Nov. 9, 2010
Designed for wireless and general-purpose applications from 800 to 2500 MHz, the AM1650DC838 directional coupler provides 6 dB of coupling with flatness of 1 dB across its frequency range. It exhibits insertion loss of 1.5 dB or less with VSWR of ...

Designed for wireless and general-purpose applications from 800 to 2500 MHz, the AM1650DC838 directional coupler provides 6 dB of coupling with flatness of 1 dB across its frequency range. It exhibits insertion loss of 1.5 dB or less with VSWR of 1.20:1 or better. The coupler's power-handling capability is a maximum of 40 W. It offers 20 dB directivity with minimal isolation of 20 dB. Intermodulation distortion for the AM1650DC838 is better than -140 dBc. The coupler uses type-N connectors and measures 4.2 x 1.6 x 0.9 in. The AM1650DC838 is available for immediate delivery.

Anatech Electronics, Inc.
70 Outwater Ln.
Garfield, NJ 07026
(973) 772-4242
FAX: (973) 772-4646
e-mail: [email protected]
Internet: www. amcrf.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...