75-Ohm Power Splitters Serve CATV Systems

Feb. 24, 2009
To meet the unique needs of the CATV and broadcast industry, new 1-W, two-way resistive power splitters are available with either 50- or 75-Ω impedances. The 75-Ω IPS series two-way splitters operate from DC to 20 GHz. They flaunt attenuation ...

To meet the unique needs of the CATV and broadcast industry, new 1-W, two-way resistive power splitters are available with either 50- or 75-Ω impedances. The 75-Ω IPS series two-way splitters operate from DC to 20 GHz. They flaunt attenuation accuracy of 0.5 dB and a VSWR of 1.30:1. These resistive power splitters have 6 dB evenly split attenuation. They feature wraparound or single-sided terminals.

International Manufacturing Services, Inc. (IMS),
50 Schoolhouse Ln.,
Portsmouth, RI 02871;
(401) 683-9700, FAX: (401) 683-5571,
Internet: www.ims-resistors.com.

See associated image.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...