High-Power Hybrid Handles Radar Signals

Dec. 19, 2006
Response Microwave has developed a high-power 90-deg. hybrid coupler that is ideal for radio and radar transmitter applications. Model RMHY3.500Nf operates over the octave band from 250 to 500 MHz with 3-dB coupling flatness of within 1 dB and ...

Response Microwave has developed a high-power 90-deg. hybrid coupler that is ideal for radio and radar transmitter applications. Model RMHY3.500Nf operates over the octave band from 250 to 500 MHz with 3-dB coupling flatness of within 1 dB and power-handling capability of 1000 W CW. It exhibits VSWR of 1.50:1 with maximum insertion loss of 0.3 dB and minimim isolation of 15 dB. The hybrid coupler, which is supplied with Type N connectors as standard, is also available with SMA, TNC, and BNC connectors as options. The component measures 6.8 x 1.75 x 0.925 inches with connectors. For more information, visit the company's website at www.responsemicrowave.com/

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...