ITT Microwave Systems Unveils Dual Synthesizer

Nov. 26, 2006
ITT Microwave Systems has developed a dual-synthesizer version of its Wavecor direct-digital-synthesizer (DDS) product. The dual synthesizer, capable of generating multiple waveforms from 300 MHz to 18 GHz, features typical spurious levels of -65 dBc. ...

ITT Microwave Systems has developed a dual-synthesizer version of its Wavecor direct-digital-synthesizer (DDS) product. The dual synthesizer, capable of generating multiple waveforms from 300 MHz to 18 GHz, features typical spurious levels of -65 dBc. The phase noise is outstanding, typically -125 dBc/Hz offset 10 kHz from a 9-GHz carrier. The dual frequency synthesizer, which is supplied in a 6U rack-mount enclosure, offers frequency switching speed of better than 300 ns. For more information, visit the ITT Microwave Systems website at www.ittmicrowave.com/

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...