Loads Channel DC To 3 GHz

March 22, 2007
A pair of high-power terminations are suitable for handling high power levels in wireless applications from DC to 3 GHz. Model TB-70 is designed for 50 W power while model TB-75 is built to take 100 W power. The terminations feature VSWR of better than ...

A pair of high-power terminations are suitable for handling high power levels in wireless applications from DC to 3 GHz. Model TB-70 is designed for 50 W power while model TB-75 is built to take 100 W power. The terminations feature VSWR of better than 1.10:1 across the full frequency range. Both terminations are available with Type N or 7/16 EIA type connectors. For more information, visit the Microlab/FXR website at: http://www.microlab.fxr.com/

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...