MMIC Amplifier Delivers 6 W Of Saturated Output Power

April 6, 2009
By balancing two XP1072-BD devices using a Lange coupler network, the XP1073-BD gallium-arsenide (GaAs) monolithic-microwave-integrated-circuit (MMIC) amplifier provides a well-matched solution for many Ka-band applications. The XP1073-BD delivers ...

By balancing two XP1072-BD devices using a Lange coupler network, the XP1073-BD gallium-arsenide (GaAs) monolithic-microwave-integrated-circuit (MMIC) amplifier provides a well-matched solution for many Ka-band applications. The XP1073-BD delivers +37-dBm pulsed saturated output power and 22-dB large signal gain. The amplifier covers 34 to 37 GHz while achieving 24 percent power added efficiency (PAE). It is well suited for millimeter-wave military, radar, satellite, and weather applications. Samples and production quantities are available in eight weeks.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, TX 77099; (281) 988-4600, FAX: (281) 988-4615, Internet: www.mimixbroadband.com.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...