Rat Race Divider Runs At 10 GHz

June 30, 2007
International Manufacturing Services (IMS) has produced a thick-film, surface-mount-technology (SMT) two-way rat-race power divider with 180-deg. outputs. Model IMD2417 is designed for use at 10 GHz with a 20 percent bandwidth exhibiting less than 0.5-dB ...

International Manufacturing Services (IMS) has produced a thick-film, surface-mount-technology (SMT) two-way rat-race power divider with 180-deg. outputs. Model IMD2417 is designed for use at 10 GHz with a 20 percent bandwidth exhibiting less than 0.5-dB insertion loss. The rat-race divider, which measures just 0.322 x 0.354 in., can handle power levels to 20 W. For more information, visit the IMS website at: www.ims-resistors.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...