Wilkinson Divider Handles 20 W At 6 GHz

May 29, 2007
International Manufacturing Services (IMS) has developed a thick-film two-way Wilkinson power divider with 20-percent bandwidth at 6 GHz. The model IMD2365 features alumina construction and proprietary high-conductivity circuit traces to achieve less ...

International Manufacturing Services (IMS) has developed a thick-film two-way Wilkinson power divider with 20-percent bandwidth at 6 GHz. The model IMD2365 features alumina construction and proprietary high-conductivity circuit traces to achieve less than 0.5 dB insertion loss. The compact component handles 20 W power and is supplied in a 3020 package for installation into the tightest systems and circuits. For more information, visit the IMS website at: http://www.ims-resistors.com/

Sponsored Recommendations

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...