A Correction

June 13, 2007
In the June issue of Penton's Military Electronics, there are two errors in the writeup on the MwT MMA022030B MMIC in the new product section ("MMIC Power Amplifier Spans2 To 20 GHz," New Products 1). The following are the corrections to the product ...

In the June issue of Penton's Military Electronics, there are two errors in the writeup on the MwT MMA022030B MMIC in the new product section ("MMIC Power Amplifier Spans2 To 20 GHz," New Products 1). The following are the corrections to the product release: "The MMIC amplifier delivers typically +28.5 dBm output at P-1dB compression from 2 to 6 GHz, typically +28 dBm output at P1dB compression from 8 to 16 GHz, and typically +29 dBm output power at P-2dB compression point from 18 to 20 GHz."

MwT also offers extended range performance from 1.5 to 22 GHz.
Don Apte
Director of Sales
MicroWave Technology

Editor's Note: We regret the errors and apologize to MicroWave Technology and our readers for the errors.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.