C-Band Synthesizer Maintains Low Noise

June 17, 2010
Model SFS6400A-LF is a C-band frequency synthesizer from Z-Communications designed for operation at 6.4 GHz. It delivers +6 dBm output power with a voltage-controlled-oscillator (VCO) supply of 40 mA and +5 VDC. It runs with phase-lock-loop (PLL) voltage ...

Model SFS6400A-LF is a C-band frequency synthesizer from Z-Communications designed for operation at 6.4 GHz. It delivers +6 dBm output power with a voltage-controlled-oscillator (VCO) supply of 40 mA and +5 VDC. It runs with phase-lock-loop (PLL) voltage of +3 VDC and 11 mA typical current. Spurious content is controlled to -65 dBc and harmonics to -20 dBc while phase noise is typically -88 dBc/Hz offset 10 kHz from the carrier. The frequency synthesizer is supplied in the firm's PLL-V-12N package measuring 0.60 x 0.60 x 0.13 in. It is available in tape-and-reel packaging for automated assembly production.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...