The new R&S ZVA-Z500 frequency converters from Rohde & Schwarz enable network analyzers to operate at frequencies to 500 GHz. The converter allows millimeter-wave measurements with a dynamic range of better than 65 dB and typical output power of -24 dBm. The frequency converters work with the company's four-port network analyzers, using a command screen from the analyzer to select the proper local oscillator (LO) conversion ratio for a desired measurement frequency range. They can be used with waveguide connectors for analyzing components, or connected to commercial wafer probe systems for on-wafer device measurements.
Advertisement
Converters Extend Frequency To 500 GHz
Advertisement
Advertisement
Webcasts
GaN Roundtable: The State of GaN Reliability Today
Wednesday, April 3rd, 2013, 2:00 pm ET. Gallium nitride (GaN) has come a long way over the past few years in terms of affordability, industry acceptance and, in particular, reliability. In this webcast roundtable, a panel of expert speakers will assess the current state of GaN reliability, along with offering predictions for its future.
Advertisement
Whitepapers
New App Note: Best Practices for Making the Most Accurate Radar Pulse Measurements
Sponsored by Agilent Technologies
Download this app note
Agilent Technologies Complex Modulation Generation with Low Cost Arbitrary Waveform Generators - Agilent's Trueform Architecture for Wireless Applications
Sponsored by Agilent Technologies
Download this white paper
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement