Coupler Directs 200 W To 2 GHz

Sept. 23, 2010
Model C40-22-48106N is a 40-dB directional coupler from Pulsar Microwave Corp. capable of handling as much as 200 W continuous-wave (CW) power from 200 to 2000 MHz. It features low insertion loss of 0.4 dB across that frequency range, with better than ...

Model C40-22-48106N is a 40-dB directional coupler from Pulsar Microwave Corp. capable of handling as much as 200 W continuous-wave (CW) power from 200 to 2000 MHz. It features low insertion loss of 0.4 dB across that frequency range, with better than 20-dB directivity. The coupling is flat within +/-1 dB across the full frequency range. The maximum VSWR is 1.80:1. The directional coupler is supplied in a rugged aluminum housing measuring 3.0 x 2.6 x 1.0 in. with SMA or Type N female in-line connectors and SMA female connectors on the coupled port.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...