Diodes Housed In Plastic Packages

Dec. 3, 2009
The MS family of PIN switch diodes and the MSAT line of attenuator diodes from Aeroflex/Metelics are usable to 10 GHz and supplied in plastic surface-mount-technology (SMT) packages with standard 31-mil-high bodies. The switch diodes are available for ...

The MS family of PIN switch diodes and the MSAT line of attenuator diodes from Aeroflex/Metelics are usable to 10 GHz and supplied in plastic surface-mount-technology (SMT) packages with standard 31-mil-high bodies. The switch diodes are available for power levels from 5 to 50 W with insertion losses at 1 GHz ranging from 0.15 through 0.40 dB. The isolation spans 10 to 63 dB at 1 GHz. The MSAT diodes are available with a variety of attenuation values, including 0.4, 0.8, 5.0, 10.0, and 27.0 dB, all with typical attenuation of 0.3 dB at 1 GHz.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...