Dividers/Combiners Cover 0.4 To 6.0 GHz

May 20, 2010
The 707 series of 180-deg. hybrid power dividers/combiners from Meca Electronics features models with Type N and SMA connectors for wireless applications from 0.4 to 6.0 GHz in 10-percent bandwidths. The components meet IP65 requirements and can handle ...

The 707 series of 180-deg. hybrid power dividers/combiners from Meca Electronics features models with Type N and SMA connectors for wireless applications from 0.4 to 6.0 GHz in 10-percent bandwidths. The components meet IP65 requirements and can handle as much as 150 W continuous power and 1 kW peak power. They measure 2.5 x 2.0 x 0.82 in. and exhibit 25 dB typical isolation with less than 0.6 dB insertion loss and typical VSWR of 1.20:1. An example of one of the Type N products is model 707N-2.850, which operates from 2.7 to 3.0 GHz. It handles 100 W CW power with 22 dB typical isolation and 1.25:1 typical VSWR.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...