Fixed Attenuators Pad DC To 3 GHz

Sept. 24, 2009
The model 752 family of precision fixed attenuators from Narda includes components with values of 3, 6, 10, 20, and 30 dB attenuation for applications from DC to 3 GHz. Designed to meet MIL-A-3933E environmental requirements, they are ideal for use in ...

The model 752 family of precision fixed attenuators from Narda includes components with values of 3, 6, 10, 20, and 30 dB attenuation for applications from DC to 3 GHz. Designed to meet MIL-A-3933E environmental requirements, they are ideal for use in military subsystems. The fixed attenuators handle 5 W average power and 300 W peak power with maximum VSWR of 1.20:1. They feature attenuation deviation of only +/-0.3 dB and weigh only 3.7 oz. (105 g). They have extremely low frequency sensitivity and minimum deviation in phase or group delay.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...