GaN Amplifier Powers 960 MHz

Sept. 9, 2009
The model SSPA 0.869-0.0960-56 power amplifier from Aethercomm is based on gallium nitride (GaN) device technology to provide 50 W output power from 869 to 960 MHz. It can be used for CW or pulsed operation with as much as 50 percent power-added ...

The model SSPA 0.869-0.0960-56 power amplifier from Aethercomm is based on gallium nitride (GaN) device technology to provide 50 W output power from 869 to 960 MHz. It can be used for CW or pulsed operation with as much as 50 percent power-added efficiency. The amplifier, which employs high-speed DC switching circuitry, features reverse polarity protection as well as under-voltage and over-voltage protection. It measures just 2 x 5 x 1 in. and is suitable for commercial and military communications platforms as well as in electronic warfare (EW) systems.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...