Limiters Span 100 To 900 MHz

April 30, 2009
Models PLS-2 and PLS-2+ are broadband diode limiters from Mini-Circuits designed for applications from 100 to 900 MHz. Suitable for commercial and military systems, the limiters are designed for minimum input power of +3 dBm and maximum input power of ...

Models PLS-2 and PLS-2+ are broadband diode limiters from Mini-Circuits designed for applications from 100 to 900 MHz. Suitable for commercial and military systems, the limiters are designed for minimum input power of +3 dBm and maximum input power of +15 dBm (100 mW). Model PLS-2 is a standard unit and model PLS-2+ is a RoHS-compliant unit. Both models feature minimal output amplitude variations over the input-power range with worst-case performance of about 0.71 dB at 900 MHz and +15 dBm. The plug-in limiters, which operate with maximum control current of 10 mA, are ideal for providing constant-amplitude signals in phase-sensitive systems.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...