People

Nov. 12, 2007
Nujira Names Pruden As VP Of Worldwide Sales Nujira has appointed KEITH PRUDEN to the position of vice president of worldwide sales. Pruden was most recently global vice president of networking sales with Agere Systems, Inc. Prior to that, Pruden ...

Nujira Names Pruden As VP Of Worldwide Sales

Nujira has appointed KEITH PRUDEN to the position of vice president of worldwide sales. Pruden was most recently global vice president of networking sales with Agere Systems, Inc. Prior to that, Pruden held executive sales positions with Agere. See associated figure

Circuit Images-DAN SPENCER to vice president of sales and marketing, responsible for all sales efforts throughout the US and Canada; formerly employed at Sanmina.

CSR plc-JOEP VAN BEURDEN to CEO and membership on the board of directors; formerly CEO of NexWave, Inc.

Interop Technologies-BRIAN MOORE to vice president of sales; formerly vice president of product marketing at ClearSky Mobile Media, Inc.

BI Technologies' Electronic Components Division-CHUCK NELSON to product marketing manager of the hybrid microcircuit business unit; formerly worked in ceramic electronic packaging with NTK and Kyocera.

LitePoint Corp.-KARSTEN VANDRUP to vice president of engineering; formerly senior research manager at Nokia Technology Platforms at Nokia. Also, SCOTT CONRAD to senior vice president of sales; formerly Western US basic instruments channel manager at Agilent. In addition, ROB BROWNSTEIN to vice president of market relations and communications; formerly chairman of marketing- services firm Words & Images.

QUALCOMM, Inc.-DONALD J. ROSENBERG to executive vice president, general counsel, and corporate secretary; formerly senior vice president, general counsel, and corporate secretary at Apple.

Tadiran Telecom, Inc.-ZEEV RUBINSTEIN to CEO, overseeing Tadiran's North and South American operations; formerly president and CEO of LEADCOM Integrated Solutions.

Trident Microsystems, Inc.-SYLVIA D. SUMMERS to CEO and membership on the board of directors; formerly executive vice president for the Consumer Smart Card and Industrial Division at Spansion, Inc.

Silicon Image, Inc.-HAL COVERT to CFO; formerly CFO at Openwave Systems, Inc.

Park Electrochemical Corp.-MATTHEW FARABAUGH to vice president and controller; formerly corporate controller of American Technical Ceramics.

Harris Corp.-PETER CHALLAN to vice president of government relations; formerly vice president of Washington Programs for Government Communications Systems.

ABI Research-JAMIE ROSS to industry analyst for wireless, based in ABI's European regional headquarters in London; formerly tracked the global wholesale pricing market for long-haul capacity and fiberoptic networks at TeleGeography.

StratEdge-BRAD KING to senior account manager; formerly held senior-level positions in sales and marketing as well as business development at California Amplifier (CalAmp)/Vytek, Indyme Electronics, and Dynatech Wireless Technologies. See associated figure

International Rectifier Corp.-DR. MICHAEL A. BRIERE to executive vice president for research and development and chief technology officer; formerly executive vice president for research and development. See associated figure

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.