PLL-Ready VCO Tunes To 2082 MHz

Aug. 5, 2010
Model ROS-2082-119+ is a surface-mount voltage-controlled oscillator (VCO) from Mini-Circuits designed for use with phase-lock-loop (PLL) integrated circuits. It tunes from 170 to 2082 MHz with a tuning voltage range of 0.5 to 5.0 V and tuning ...

Model ROS-2082-119+ is a surface-mount voltage-controlled oscillator (VCO) from Mini-Circuits designed for use with phase-lock-loop (PLL) integrated circuits. It tunes from 170 to 2082 MHz with a tuning voltage range of 0.5 to 5.0 V and tuning sensitivity of typically 110 to 130 MHz/V. The oscillator offers a 3-dB modulation bandwidth of typically 270 MHz around the tuned center frequency. Harmonics are typically -24 dBc while nonharmonic spurious content is typically -90 dBc. The VCO, which typically draws 27 mA from a +5-VDC supply, exhibits phase noise of typically -97 dBc/Hz offset 10 kHz from the carrier and typically -118 dBc/Hz offset 100 kHz from the carrier. The oscillator is supplied in a surface-mount housing measuring 0.5 x 0.5 in.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...