Switch Controls 0.5 To 40 GHz

April 6, 2011
Designed for speed, bandwidth, and low power consumption, model P4T-500M40G-60-T-55-292FF from PMI is an absorptive solid-state switch with extremely broad frequency range of 500 MHz to 40 GHz. It exhibits low insertion loss of typically 4.8 dB with fast ...

Designed for speed, bandwidth, and low power consumption, model P4T-500M40G-60-T-55-292FF from PMI is an absorptive solid-state switch with extremely broad frequency range of 500 MHz to 40 GHz. It exhibits low insertion loss of typically 4.8 dB with fast switching speed of typically 27 ns. It features at least 60-dB isolation at 40 GHz and better than 100 dB isolation at the lower frequencies. The rugged switch is supplied in a compact housing and draws only 125 mA current from +5 VDC and 70 mA from -5 VDC supplies.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...