Three-Channel Amp Powers 80 To 6000 MHz

Dec. 10, 2009
Three-channel power amplifier model 7005 from OPHIR RF provides a total frequency range of 80 to 6000 MHz. Channel 1 delivers 150 W output power at 1-dB compression and 280 W typical saturated output power from 80 to 1000 MHz. Channel 2 offers 60 W ...

Three-channel power amplifier model 7005 from OPHIR RF provides a total frequency range of 80 to 6000 MHz. Channel 1 delivers 150 W output power at 1-dB compression and 280 W typical saturated output power from 80 to 1000 MHz. Channel 2 offers 60 W typical output power at 1-dB compression and 80 W typical saturated output power from 100 to 2500 MHz. Channel 3 yields 30 W typical output power at 1-dB compression and 50 W typical saturated output power from 2500 to 6000 MHz. Nominal input power of 0 dBm is needed to achieve the rated output-power levels. Harmonics are typically -20 dBc and spurious levels are typically -60 dBc or less. The Class AB rack-mount amplifier weighs 350 lbs. or less and measures 42 x 24 x 30 in.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...