Tiny Hybrid Coupler Handles 100 W CW

Sept. 24, 2009
Model IPP-7004 is a 3-dB 90-deg. hybrid coupler from Innovative Power Products designed to combine two signals from 2.5 to 6.0 GHz at power levels to 100 W CW. It exhibits less than 0.3 dB insertion loss and less than 1.30:1 VSWR and more than 18 dB ...

Model IPP-7004 is a 3-dB 90-deg. hybrid coupler from Innovative Power Products designed to combine two signals from 2.5 to 6.0 GHz at power levels to 100 W CW. It exhibits less than 0.3 dB insertion loss and less than 1.30:1 VSWR and more than 18 dB isolation. The amplitude balance is within +/-0.75 dB while the phase balance is within +/-5 deg. The surface-mount coupler measures 0.56 x 0.20 x 0.10 in.

Sponsored Recommendations

In-Circuit Antenna Verification

April 19, 2024
In this video, Brian Walker, Senior RF Design Engineer at Copper Mountain Technologies, shows how there can be significant variation of the performance of a PCB-mounted antenna...

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...