Tiny OCXOs Trim Phase Noise

Sept. 23, 2010
The OCXO 147 series of oven-controlled crystal oscillators (OCXOs) from Isotemp Research provides low-phase-noise performance for frequencies from 5 to 50 MHz. Delivering HCMOS level outputs, the oscillators achieve phase noise of -100 dBc/Hz offset 10 ...

The OCXO 147 series of oven-controlled crystal oscillators (OCXOs) from Isotemp Research provides low-phase-noise performance for frequencies from 5 to 50 MHz. Delivering HCMOS level outputs, the oscillators achieve phase noise of -100 dBc/Hz offset 10 Hz from the carrier. Frequency stability is as good as +/-30 ppb for temperatures from 0 to +70 deg. C. The oscillators are designed to run on supply voltages of +3.3 or +5 VDC. The miniature oscillators measure only 20.3 x 12.7 mm. The OCXOs can be used in many communication applications requiring high frequency stability and low phase noise such as master system clocks, femtocells, and mobile base stations.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.