Use A SAW To Make A Synthesizer?

In this case, the SAW is a voltage-controlled surface-acoustic-wave oscillator (VCSO) developed by Synergy Microwave Corp., and it can contribute to impressive phase-noise performance in synthesized sources through microwave frequencies. The tale is told in the article "VCSO Technology Silences Synthesizers" in the February issue of Microwaves & RF.

In high-frequency synthesizer lore, many different frequency sources have been used as the primary oscillator, including voltage-controlled oscillators (VCOs), yttrium-iron-garnet (YIG), and SAW oscillators, with each offering different characteristics in terms of tuning range, switching speed, and noise. The VCSO-based synthesizer in the aforementioned article tunes from 5000 to 5300 MHz with phase noise specified at -120 dBc/Hz offset 100 kHz from the carrier.

Please or Register to post comments.

Newsletter Signup

Webcasts

GaN Roundtable: The State of GaN Reliability Today

Wednesday, April 3rd, 2013, 2:00 pm ET. Gallium nitride (GaN) has come a long way over the past few years in terms of affordability, industry acceptance and, in particular, reliability. In this webcast roundtable, a panel of expert speakers will assess the current state of GaN reliability, along with offering predictions for its future.

Click here to register!

Whitepapers

New App Note: Best Practices for Making the Most Accurate Radar Pulse Measurements
Sponsored by Agilent Technologies
Download this app note

Agilent Technologies Complex Modulation Generation with Low Cost Arbitrary Waveform Generators - Agilent's Trueform Architecture for Wireless Applications
Sponsored by Agilent Technologies
Download this white paper

Browse more white papers from Microwaves and RF

Connect With Us