MITEQ's Synthesizers Cut Noise To Ku-Band

Feb. 21, 2008
The BTE synthesizer series from MITEQ is designed for applications requiring low phase noise from S-band through Ku-band frequencies. Standard units tune 12.72 to 14.84 GHz with 1 kHz resolution, although custom frequencies are available. They deliver ...

The BTE synthesizer series from MITEQ is designed for applications requiring low phase noise from S-band through Ku-band frequencies. Standard units tune 12.72 to 14.84 GHz with 1 kHz resolution, although custom frequencies are available. They deliver +13 dBm output power with +/-2 dB output flatness. The phase noise is better than -87 dBc/Hz offset 1 kHz from the carrier and better than -111 dBc/Hz offset 1 MHz from the carrier. In-band spurious signals are -70 dBc. The synthesizers can be supplied with an optional fixed second local oscillator (LO) output and are packaged to meet extremely low electromagnetic-interference (EMI) emission requirements and has options for parallel or serial communications and control. They measure 8 x 5 x 0.7 in. with SMA female connectors and weigh less than 2 lbs.

MITEQ, Inc. (www.miteq.com)

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

50W SSPA with Built-In Signal Source & Control

March 14, 2024
The RFS-2G42G5050X+ takes Mini-Circuits robust line of solid state, connectorized, high-power amplifiers for RF energy to a new level by integrating the versatility of a signal...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...