Mwrf 1248 Arra P 0
Mwrf 1248 Arra P 0
Mwrf 1248 Arra P 0
Mwrf 1248 Arra P 0
Mwrf 1248 Arra P 0

Variable Attenuator Pads 2 to 4 GHz

April 4, 2014
Variable Attenuator Pads 2 To 4 GHz
Model 4804-10AZ is a compact variable attenuator designed for use from 2 to 4 GHz. It features a 10-dB attenuation range with 0.1-dB or better resettability from –55 to 85°C. The variable attenuator exhibits maximum VSWR of 1.80:1 with 0.5-dB maximum insertion loss. It is housed in an aluminum package with SMA female stainless-steel connectors. The variable attenuator is rated for 5-W average power-handling capability and 3-kW peak power-handling capability. Additional variable attenuators in the series are available for bands from 1 to 18 GHz with as much as 40-dB attenuation.

ARRA Inc., 15 Harold Court, Bay Shore, NY 11706-2296, (516) 231-8400, FAX: (516) 434-1116, www.arra.com

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...