Articles
Software Helps Design Multimode Antenna Feeds
Satellite-communications (satcom) systems at Ka-band frequencies rely on the precise pointing of multiple narrow antenna beams for effective operation. Accordingly, a group of researchersfrom Canada's MDA Space, Germany's Mician GmbH, and the European ...
Scope Grabs 4-GHz Signals
The model R&S RTO1044 4-GHz real-time oscilloscope is suitable for use with the new model R&S RT-ZD40 differential probe with 4.5-GHz bandwidth for analysis of circuit designs through 4 GHz. The oscilloscope, with its combination of wide dynamic ...
Approach Cuts Costs Of Performing Radar Simulations
Radar systems and radar-cross-section (RCS) measurements were once associated only with military applications. But the expansion of radar technologies to consumer and commercial applications has created a need for lower-cost RCS measurement approaches to ...
Acquisition Merges Package And Lid Sources
Thanks to a recent acquisition, a greater variety of hermetic lids can be made for the semiconductor, microelectromechanical-systems (MEMS), medical, and optical markets. Customers are increasingly looking for complete ...
Whitepapers

How to Do Fixture De-Embedding to Match Signal Integrity Simulations to Measurements​
Sponsored by Keysight Technologies
Download this white paper


Testing S-Parameters on Pulsed Radar Power Amplifier Modules​
Sponsored by Rohde & Schwarz
Download this white paper

 

 

 

Webcasts

Perform Power Supply Frequency Response Analysis using an Oscilloscope
May 19, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


PAM-4 Transmitter and Receiver Design Characterization Solutions
May 21, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


DisplayPort 1.3 – PHY Layer Test Requirements
May 27, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!


Extraction, Verification, and Usage of a Short Haul Opto VCSEL Model
May 28, 2015 @ 1pm EST
Sponsored by Keysight Technologies
Register Now!

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×