Mwrf 1395 Emcpromo 0

Hybrid Couplers Cut Losses To 3.4 GHz

May 21, 2014
Two components represent the outstanding performance through 3.4 GHz from a line of broadband hybrid couplers.

A series of low-loss, wideband hybrid couplers is represented by the models WH0530TF and WH1727F components, which are part of the HybriX signal-distribution family of products. Model WH0530TF is a hybrid coupler optimized for use from 0.5 to 3.4 GHz and ideal for use in switch networks, antenna feeds, and with power amplifiers. It provides at least 20-dB isolation from 500 to 3400 MHz, with maximum insertion loss of 0.5 dB.

The maximum VSWR over that frequency range is 1.20:1. The model WH1727F hybrid coupler is well suited for Fourth-Generation (4G) Long-Term-Evolution (LTE) applications from 1700 to 2700 MHz. Over that range, it achieves low typical insertion loss of 0.1 dB with 30-dB typical isolation between ports. Both couplers are designed for operating temperatures from -55 to +85°C.

EMC Technology, 8851 SW Old Kansas Ave., Stuart, FL 34997; (772) 600-1608

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.