Resistive Couplers Span DC To 15 GHz

Jan. 28, 2010
The IMK series of resistive couplers from International Manufacturing Services, Inc. (IMS) is available for applications from DC to 15 GHz. The resistive couplers can be specified with values of 6 to 30 dB with less than 1 dB insertion loss for coupling ...

The IMK series of resistive couplers from International Manufacturing Services, Inc. (IMS) is available for applications from DC to 15 GHz. The resistive couplers can be specified with values of 6 to 30 dB with less than 1 dB insertion loss for coupling values greater than 18 dB. The VSWR is typically 1.2:1 while the typical power-handling capability is 1 W. Fabricated with thick film on alumina substrates, the couplers measure 0.120 x 0.120 x 0.035 in. or less. Samples of the IMK series resistive coupler are available by visiting the company's web site.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...