Switch Controls 0.1 To 2.7 GHz

July 11, 2012

Model SKY13388-465LF is a symmetrical, single-pole, four-throw (SP4T) switch designed for applications from 100 MHz to 2.7 GHz. Built with a silicon-on-insulator (SOI) process, the switch requires only two control lines for operation. The high-performance SP4T switch features typical isolation of better than 30 dB at 1.0 GHz and more than 23 dB at 2.7 GHz. The insertion loss is typically 0.60 dB at 2.2 GHz and 0.65 dB at 2.7 GHz. The switch, which runs on supplies of +2.5 to +5.5 VDC, is rated for +37 dBm maximum input power. It exhibits an input 1-dB compression point of typically +36 dBm from 0.8 to 2.7 GHz, and an input third-order intercept point of typically +65 dBm. The switch is supplied in a compact quad flat no lead (QFN) housing measuring just 2 x 2 mm.

Skyworks Solutions, Inc., 20 Sylvan Rd., Woburn, MA 01801; (781) 376-3000, FAX: (781) 376-3100, e-mail: [email protected], www.skyworksinc.com.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.