An artist's concept of one of the eight CGYNSS satellites deployed in space above a hurricane. (Image courtesy of NASA).
An artist's concept of one of the eight CGYNSS satellites deployed in space above a hurricane. (Image courtesy of NASA).
An artist's concept of one of the eight CGYNSS satellites deployed in space above a hurricane. (Image courtesy of NASA).
An artist's concept of one of the eight CGYNSS satellites deployed in space above a hurricane. (Image courtesy of NASA).
An artist's concept of one of the eight CGYNSS satellites deployed in space above a hurricane. (Image courtesy of NASA).

Hurricane-Tracking Microsatellites Harness GPS Signals

Oct. 15, 2015
After completing a series of design reviews earlier this year, the National Aeronautics and Space Administration (NASA) has begun the assembly of its new fleet of CGYNSS hurricane-observing satellites.

After completing a series of design reviews earlier this year, the National Aeronautics and Space Administration (NASA) has begun the assembly of its new fleet of hurricane-observing satellites. The Cyclone Global Navigation Satellite System (CYGNSS) will consist of eight microsatellites in low-earth orbit, monitoring tropical storms, hurricanes, and typhoons throughout their lifecycle.

The CGYNSS satellite network was not designed to be an independent system, but rather to harness signals from existing GPS satellites. By analyzing both direct and reflected GPS signals, the microsatellites give meteorologists access to the inner core of severe weather patterns. The direct signals serve to pinpoint satellite positions, while the reflected signals measure the roughness of the ocean’s surface, from which wind speed and other data points can be estimated. Each satellite is capable of measuring four simultaneous reflections, resulting in 332 wind measurements per second.

The data generated by the satellites will significantly enhance hurricane forecasting, providing more accurate predictions of hurricane tracks, intensities, and storm surges. CYGNSS will measure surface winds in the hurricane’s inner depths, including the eye wall and intense inner rain bands—regions that scientists have never been able to measure from space. The CYGNSS wind measurements, coupled with precipitation data, will open new insights into moist atmospheric thermodynamics and hurricane behavior, according to the University of Michigan, which directed the design and production of the satellites.

The main advantage of the CYGNSS network is in the large number of measurements it can make. For instance, the interaction of GPS and CYGNSS satellites will produce a new image of wind speeds over the entire tropics every few hours. On the other hand, it would take a single satellite a few days to generate the same information. Successive microsatellites will pass over the same region of the earth approximately every 12 minutes, according to NASA. The eight microsatellites, each slightly larger than a standard carry-on suitcase, will be deployed in a 500-km orbit and at an inclination of about 35 deg.

Southwest Research Institute engineers and technicians assemble and integrate an engineering model of the CYGNSS microsatellite. (Image courtesy of NASA and Southwest Research Institute).

The design reviews marked “the end of the detailed design and planning stage of the [CYGNSS] mission and the beginning of flight hardware assembly,” says Chris Ruf, CYGNSS principal investigator at the University of Michigan, Ann Arbor. The Southwest Research Institute in San Antonio is building and testing the CYGNSS microsatellites and will host the mission operations center at its Boulder, Colo. facility.

The satellites are expected to be ready for testing in early 2016. The mission is scheduled to launch late next year on an Orbital ATK Pegasus XL rocket from the Cape Canaveral Air Force Station in Florida. NASA officials have said that scientific operations are scheduled to begin with the Atlantic hurricane season in 2017.

Sponsored Recommendations

Microelectromechanical 3D Printing Resources

March 28, 2024
Check out our curated list of microelectromechanical 3D printing resources and see how PµSL technology offers freedom and speed.

Understanding 3D Printing Tolerances: A Guide to Achieving Precision in Additive Manufacturing

March 28, 2024
In the world of additive manufacturing, precision is paramount. One crucial aspect of ensuring precision in 3D printing is understanding tolerances. In this article, we’ll explore...

Making the Case for Micro-Precision 3D Printing

March 28, 2024
Read this white paper to learn how micro-precision 3D printing can provide the flexibility of additive manufacturing at a micro scale.

125 GHz Frequency Doubler using a Waveguide Cavity Produced by Stereolithography

March 28, 2024
Read this technical paper to learn how a 125 GHz frequency doubler using a waveguide cavity was produced by stereolithography.