1 5 G 1540x800 62e0161ee3a9a

Signal generator, signal and spectrum analyzer and power sensor applications for 5G

July 27, 2022
Solutions that go all the way to millimeterwave frequencies and beyond

Three things distinguish the 5G air interface from previous cellular generations: higher carrier frequencies, wider carrier bandwidths and flexible physical layer parameterization to support different requirements. In this white paper you will learn more about wideband signal generation analysis solutions that go all the way to millimeterwave frequencies and beyond. These signal generation and analysis solutions cover the bandwidth and frequency requirements for 5G and offers a wide range of features and application software to address 5G testing challenges.

This content is sponsored by:

Sponsored Recommendations

Wideband Peak & Average Power Sensor with 80 Msps Sample Rate

Mini-Circuits’ PWR-18PWHS-RC power sensor operates from 0.05 to 18 GHz at a sample rate of 80 Msps and with an industry-leading minimum measurement range of -40 dBm in peak mode...

Turnkey Solid State Energy Source

Featuring 59 dB of gain and output power from 2 to 750W, the RFS-G90G93750X+ is a robust, turnkey RF energy source for ISM applications in the 915 MHz band. This design incorporates...

90 GHz Coax. Adapters for Your High-Frequency Connections

Mini-Circuits’ expanded line of coaxial adapters now includes the 10x-135x series of 1.0 mm to 1.35 mm models with all combinations of connector genders. Ultra-wideband performance...

Ultra-Low Phase Noise MMIC Amplifier, 6 to 18 GHz

Mini-Circuits’ LVA-6183PN+ is a wideband, ultra-low phase noise MMIC amplifier perfect for use with low noise signal sources and in sensitive transceiver chains. This model operates...