We offer an innovative lineup of in-stock, VHF / UHF Antennas including Collinear, Yagi, Exposed Dipoles, and Dipole Arrays, for a variety of applications, including military communications, trunking, Land Mobile Radio (LMR), public safety, and amateur radio.

200V RF Reliability Testing is becoming a key parameter of a robust GaN reliability testing strategy. Semiconductor manufacturers aim to utilize the wide bandgap of GaN to maximize performance and efficiency with 200V operation.  Device reliability at 200V under RF drive must be assessed in parallel, as the associated high fields and power dissipation may drive different failure mechanisms than what has been observed at 28V or 48V operation.

The SGX1000 RF signal generator utilizes direct digital and direct analog synthesis to provide ultra-fine frequency resolution, lightning-fast frequency switching, ultra-low phase noise and jitter, and superior reliability. For satcom systems, the SGX1000 can be used as a local oscillator substitute to test up and down converters in ground stations, terminals, or satellite payloads.

SV Microwave's newest web tool, the Humboldt Multiport Builder, is an intuitive drag-and-drop platform that allows you to create any 2-, 4- or 8-port cable assembly harness you can imagine. Instantly see pricing and data sheets and receive your custom RF multiport assembly in 15 days!

KYOCERA AVX A-Series automotive antennas deliver on the key needs of device designers for higher functionality. KYOCERA AVX has completed rigorous testing to qualify the A-series antennas for automotive applications. Although the AEC-Q200 standard does not include antenna products, all testing has been done following applicable AEC-Q200 requirements and procedures as closely as possible.

The new SLM128X is a high performance 4RU solid-state modular switch array specifically designed for routing L-Band and S-Band signals by spanning 850-2450MHz frequency range. Two versions provide a full Fan-OUT (distributive) or Fan-IN (combiner) design that can be configured from a reduced 8-in x 8-out configuration, to a fully expanded 64-in x 128-out layout. Compact and feature rich, the 4RU rack mount unit features all I/O connectors at the rear, dual CPU and redundant supplies.

PicoScope 9311-20 USB sampling oscilloscopes feature deskewable rising and falling step generators, producing 2.5 to 7 V steps with 60 ps rise times, for single-ended and differential TDR/TDT measurements. These devices can be used to characterize transmission lines, PCB traces, connectors, and cables with 16 mm resolution for impedance measurements and 4 mm resolution for fault detection.