Mwrf 1074 Hittite 0

GaN MMIC Amps Power 6 To 18 GHz

Dec. 19, 2013
A GaN-based MMIC power amplifier supplies 10 W output power from 6 to 18 GHz.

A high-power monolithic-microwave-integrated-circuit (MMIC) amplifier based on gallium-nitride (GaN) semiconductor technology has been developed for communications, test, and military applications from 6 to 18 GHz. Model HMC7149 provides 10-W output power from 6 to 18 GHz and typical small-signal gain of 20 dB. It provides +40-dBm saturated output power and draws 680 mA quiescent current from a +28-VDC supply. Model  HMC7149, supplied as a die measuring just 3.4 × 4.5 × 0.1 mm, achieves 10-dB gain at saturated output power with ±0.5-dB gain flatness. Input/output return loss is typically 17 dB while power-added efficiency (PAE) is typically 22%.

Hittite Microwave Corp., 2 Elizabeth Dr., Chelmsford, MA 01824; (978) 250-3343, FAX: (978) 250-3373.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.