Mwrf 1507 Meca 0
Mwrf 1507 Meca 0
Mwrf 1507 Meca 0
Mwrf 1507 Meca 0
Mwrf 1507 Meca 0

Low-PIM Terminations Extend to 2.7 GHz

July 25, 2014
Coaxial terminations handle CW power levels to 50 W across a frequency range of 0.698 through 2.700 GHz.

A line of high-power terminations provides low passive-intermodulation (PIM) levels for applications from 0.698 through 2.700 GHz. Ideal for in-building and base-station communications wireless-infrastructure applications, these rugged loads are rated for average power-handling capabilities of 50 W and peak power levels to 2500 W. They exhibit minimum VSWR of 1.20:1 and typical VSWR of 1.10:1 across the frequency band with typical PIM level of -160 dBc at operating temperatures to +85°C. The terminations are available with a variety of connectors, including Type-N, 7/16 DIN, Type-N, and mini-DIN connectors. Each termination is supplied in a compact housing measuring 6 × 2.26 in.

MECA Electronics, Inc., 459 East Main St., Denville, NJ 07834; (866) 444-6322, (973) 625-0661, FAX: (973) 625-9277

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...