Power Divider Muscles 250 W

Sept. 26, 2012
Model 2372A-2 is a two-way power divider from Narda Microwave-East, an L-3 Communications Co., that is designed for large loads: as much as 250 W CW power from 0.5 to 2.5 GHz.

Model 2372A-2 is a two-way power divider from Narda Microwave-East, an L-3 Communications Co., that is designed for large loads: as much as 250 W CW power from 0.5 to 2.5 GHz. It can handle as much as 2 kW peak power across the full frequency range. The power divider boasts amplitude balance of ±0.25 dB and phase balance between signal paths of ±5 deg. Suitable for commercial and military applications, it measures a mere 3.5 x 2.5 x 1.0 in. with Type N female connectors. It exhibits less than 0.6 dB insertion loss, yet provides at least 13-dB port-to-port isolation from 500 to 700 MHz and 18-dB isolation from 0.7 to 2.5 GHz. The power divider has less than 1.50:1 VSWR across its frequency range.

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...