Modular SoC Design Integrates RF Transceiver In 32-nm Process

April 29, 2013
This system on a chip (SoC) integrates diverse digital, analog, and RF blocks on a single die, allowing the RF transceiver and associated RF front end to co-exist with the rest of the SoC while maintaining RF performance.

Because of incompatible process features and the challenges of managing system noise, the RF portion of a WiFi radio still tends to be an external personal-computer (PC) component. Impressively, however, researchers at Intel Corp. have created an integrated, standard x86 operating-system-compliant, dual-core ATOM-processor-based system-on-a-chip (SoC) that includes the WiFi RF transceiver. This SoC is designed for rapid integration and customization for specific market segments. As such, it boasts a multi-source intellectual-property (IP) ecosystem, which comprises both modular and configurable building blocks.

A standardized SoC interface is used to reduce design time while allowing the integration of diverse IP blocks. It implements a custom interconnect fabric called Intel On-Chip System Fabric (IOSF), which provides a standardized interface supporting signaling, decoding, flow control, and power management of IP. It also can support industry-standard buses. 

During 2.4-GHz IEEE 802.11g operation, the RF transceiver offers receive sensitivity of -74 dBm, an input third-order intercept point of -8 dBm, and transmit output power of +20.3 dBm (-25 dB error vector magnitude) at 14% transmit RF efficiency. Boosting integration, the SoC houses PCI-e Gen 2, DDR3, legacy I/O, voltage regulators, clock generation, power management, a memory controller, and the RF portion of the WiFi transceiver. This feat is managed in a 32-nm high-k/metal-gate RF CMOS process fabricated on a high resistivity substrate.

This impressive development is the brainchild of the following individuals: Hasnain Lakdawala; Mark Schaecher; Chang-Tsung Fu; Rahul Limaye; Jon Duster; Yulin Tan; Ajay Balankutty; Erkan Alpman; Chun C. Lee; Khoa Minh Nguyen; Hyung-Jin Lee; Ashoke Ravi; Satoshi Suzuki; Brent R. Carlton; Hyung Seok Kim; Marian Verhelst; Stefano Pellerano; Tong Kim; Satish Venkatesan; Durgesh Srivastava; Peter Vandervoorn; Jad Rizk; Chia-Hong Jan; Sunder Ramamurthy; Raj Yavatkar; and Krishnamurthy Soumyanath. See “A 32 nm SoC with Dual Core ATOM Processor and RF WiFi Transceiver,” IEEE Journal Of Solid-State Circuits, Jan. 2013, p. 91.

Sponsored Recommendations

Getting Started with Python for VNA Automation

April 19, 2024
The video goes through the steps for starting to use Python and SCPI commands to automate Copper Mountain Technologies VNAs. The process of downloading and installing Python IDC...

Introduction to Copper Mountain Technologies' Multiport VNA

April 19, 2024
Modern RF applications are constantly evolving and demand increasingly sophisticated test instrumentation, perfect for a multiport VNA.

Automating Vector Network Analyzer Measurements

April 19, 2024
Copper Mountain Technology VNAs can be automated by using either of two interfaces: a COM (also known as ActiveX) interface, or a TCP (Transmission Control Protocol) socket interface...

Guide to VNA Automation in MATLAB Using the TCP Interface

April 19, 2024
In this guide, advantages of using MATLAB with TCP interface is explored. The how-to is also covered for setting up automation language using a CMT VNA.